Our food safe silicone shot glass mold is perfectly sized for making edible candy shot glasses, casting resin candle holders, and icy frozen shots. This flexible silicone tray will make 8 glasses, is reusable, easy to clean and easy to de-mold. It’s also dishwasher safe! Be sure to wash before and after each use.
– 1 Shot Glass Tray Mold to make 8 glasses.
Mold Dimensions: 10.4 x 2.46 inch (26.5 x 6.25 centimeter), Cavity dimensions: 1.77 diamater x 2.2 inch (4.5 diameter x 5.6 centimeter)
Mold Size: Small to Large Mold Complexity: Simple to Complex Level of Detail: Moderate Time to Harden: Long
Epoxy Resins are the preferred choice for casting durable, long lasting resin projects or as a protective coating on existing products. Epoxy resin requires two components a catalyst and a hardener that is mixed together inducing a chemical reaction that will allow the liquid components to cure into a hardened product. Depending on the size of your project curing times can range 12-48 hours. Its maximum layer thickness is 5mm so it is best suited for thicker projects. If your resin product is intended for outdoor use it is recommended to apply a coating of UV resin to the outside to protect your product from yellowing and UV breakdown from the sun.
Mold Size: Very Small to Small or Detail Work Mold Complexity: Simple to Complex Level of Detail: High Time to Harden: Very Short
UV Resin is the preferred choice for obtaining quick results and fine details with it quick drying properties underneath a UV light. Unlike Epoxy resin, UV resin only contains on component that is instantly ready for use to dye and cure under a UV light. Its maximum layer thickness is 1mm so it is best suited for fine details inside of an epoxy coated piece, or in smaller pieces like jewelry. You should always wear a dust mask and UV safety glasses when working with UV resin. It is neither heat nor scratch resistant so an epoxy cast coating is often applied to the final piece.
Mold Size: Small to Medium Mold Complexity: Simple to Moderate Level of Detail: Moderate Time to Harden: Medium to Long
Silicone molds are extremely popular for soap making due to their ease of use. Sturdy yet flexible, silicone molds make unmolding both cold process and melt and pour soap easy. The key is to break the airlock by gently pulling away the sides of the mold from the soap. If you experience any resistance when removing cold process soap, stop and give it a few more days in the mold.
Mold Size: Small to Medium Mold Complexity: Simple to Moderate Level of Detail: Moderate Time to Harden: Short to Medium
Using silicone molds for candles you’ll want to add a hole to the base to insert your wick. keeping your beeswax or paraffin wax warm you can add layers, aromas, and decorative elements to your mold in layers and then easily remove you mold to reveal you final product.
Mold Size: Medium to Large Mold Complexity: Simple Level of Detail: Simple to Moderate Time to Harden: Medium
Simple shapes are best for bath bombs to preserve their structure and incorporate desired elements from color swirls to spin factors which will be impacted by the mold’s shape. Bath bombs generally need to set in the molds 4 hours to overnight depending on the size and complexity of the mold chosen.
Fondant and Candy Making:
Mold Size: Small to Medium, generally tray style molds Mold Complexity: Simple to Moderate Level of Detail: Simple to Moderate Time to Harden: Short
Best used with tray style molds to make fondant pieces for cake decorating or as candy molds for chocolates.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.